Duenne non è un rivenditore autorizzato

EL1809 - BECKHOFF

EL1809 | EtherCAT Terminal, 16-channel digital input, 24 V DC, 3 ms
The EL1809 digital input terminal acquires the binary 24 V control signals from the process level and transmits them, in an electrically isolated form, to the higher-level automation unit. The EtherCAT Terminal has 16 channels, whose signal states are indicated by LEDs. The power contacts are connected through. With the EL1809, the reference ground for all inputs is the 0 V power contact.
Special features:
input specification type 1/3
no bouncing due to mechanical switches thanks to 3 ms input filter
tool-free connection by direct plug-in technique for solid wire conductors
space-saving use in the control cabinet
direct connection of multi-channel sensors in 1-wire connection technology in the smallest space
increased packing density with 16 connection points in the housing of a 12 mm terminal block
Connection technology 1-wire
Specification EN 61131-2, type 1/3
Number of inputs 16
Nominal voltage 24 V DC (-15 %/+20 %)
“0” signal voltage -3…+5 V (EN 61131-2, type 1/3)
“1” signal voltage 11…30 V (EN 61131-2, type 3)
Input current typ. 3 mA (EN 61131-2, type 3)
Input filter typ. 3.0 ms
Distributed clocks –
Current consumption power contacts typ. 4 mA + load
Current consumption E-bus typ. 100 mA
Electrical isolation 500 V (E-bus/field potential)
Configuration no address or configuration setting
Special features standard terminal with high number of channels for slow 24 V DC edges, direct plug-in technique
Weight approx. 65 g
Operating/storage temperature -25…+60 °C/-40…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. rating/installation pos. IP20/variable (see documentation)
Approvals/markings CE, UL, ATEX
Ex marking II 3 G Ex nA IIC T4 Gc
Design form HD (High Density) housing with signal LEDs
Material polycarbonate
Dimensions (W x H x D) 12 mm x 100 mm x 68 mm
Installation on 35 mm DIN rail, conforming to EN 60715 with lock
Side by side mounting by means of double slot and key connection
Marking labeling of the BZxxx series
Wiring solid conductors (e): direct plug-in technique; fine-stranded conductors (f) and ferrule (a): spring actuation by screwdriver
Connection cross-section s*: 0.08…1.5 mm²,
st*: 0.25…1.5 mm²,
f*: 0.14…0.75 mm²
Connection cross-section AWG s*: AWG 28…16,
st*: AWG 22…16,
f*: AWG 26…19
Stripping length 8…9 mm
Current load power contacts Imax: 10 A

From: 206,00  IVA esc.

Disponibilità:

I più venduti: