Duenne non è un rivenditore autorizzato

EL2042 - BECKHOFF

EL2042 | EtherCAT Terminal, 2-channel digital output, 24 V DC, 2 x 4 A/1 x 8 A
The EL2042 digital output terminal connects binary 24 V DC control signals to the actuators with electrical isolation. Each EtherCAT Terminal contains two channels whose signal state is indicated by LEDs. The EL2042 enables connection of loads with current consumption up to 8 A if the outputs are connected in parallel. Two 3-wire actuators can be connected directly to the EL2042.
Special features:
Connection of different load types possible (ohmic, inductive, lamp load)
Max. output current of 4 A per channel or 8 A with parallel connection
Short-circuit-proof outputs and reverse polarity protection
Connection technology 3-wire
Number of outputs 2
Nominal voltage 24 V DC (-15 %/+20 %)
Load type ohmic, inductive, lamp load
Distributed clocks –
Max. output current 4.0 A (short-circuit proof) per channel, 8 A for parallel connection
Short-circuit current typ. < 70 A Reverse voltage protection yes Breaking energy < 1.7 J/channel Switching times typ. TON: 40 µs, typ. TOFF: 200 µs Current consumption E-bus typ. 120 mA Electrical isolation 500 V (E-bus/field potential) Current consumption power contacts typ. 15 mA + load Bit width in the process image 2 outputs Configuration no address or configuration setting Weight approx. 55 g Operating/storage temperature 0…+55 °C/-25…+85 °C Relative humidity 95 %, no condensation Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27 EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4 Protect. rating/installation pos. IP20/variable Pluggable wiring for all ESxxxx terminals Approvals/markings CE Design form compact terminal housing with signal LEDs Material polycarbonate Dimensions (W x H x D) 12 mm x 100 mm x 68 mm Installation on 35 mm DIN rail, conforming to EN 60715 with lock Side by side mounting by means of double slot and key connection Marking labeling of the BZxxx series Wiring solid conductor (e), flexible conductor (f) and ferrule (a): spring actuation by screwdriver Connection cross-section s*: 0.08…2.5 mm², st*: 0.08…2.5 mm², f*: 0.14…1.5 mm² s*: 0.08…1.5 mm², st*: 0.08…1.5 mm², f*: 0.14…1.5 mm² Stripping length 8…9 mm Current load power contacts Imax: 10 A

From: 149,00  IVA esc.

Disponibilità:

I più venduti: