Duenne non è un rivenditore autorizzato

EL2652 - BECKHOFF

EL2652 | EtherCAT Terminal, 2-channel relay output, 230 V AC, 300 V DC, 1 A
The EL2652 output terminal has two relays each with a changeover contact, which can be used universally for the switching of mains voltage consumers of 230 V AC or 300 V DC. The EL2652 features potential-free contacts. The signal state of the EtherCAT Terminal is indicated by light emitting diodes.
Special features:
Relay output
2x changeover contacts
Reverse switching is possible
Connection of different load types (ohmic, inductive, lamp load)
potential-free
no power contacts
Connection technology relay output
Number of outputs 2 x change-over
Switching voltage max. 250 V AC, 300 V DC
Nominal voltage 230 V AC (max. switching voltage 250 V AC/300 V DC)
Load type ohmic, inductive, lamp load
Distributed clocks –
Ohmic switching current 3 A AC/DC (at 30 V DC), 1 A AC/DC (at 40 V DC), 0.15 A DC (at 300 V DC), for UL: 1 A, max. 230 V AC
Minimum permitted load 100 mA at 12 V
Current consumption E-bus 180 mA
Electrical isolation 1.5 kV (E-bus/field potential); 2.5 kV rated surge voltage, overvoltage category III
Current consumption power contacts –
Max. switching frequency 6/min. (at rated load)
Operating cycles mech. (min.) 5 x 106
Operating cycles electr. (min.) 1 x 106 (1 A/250 V AC ohmic load)
Special features reverse switching realizable
Weight approx. 55 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. rating/installation pos. IP20/variable
Pluggable wiring for all ESxxxx terminals
Approvals/markings CE, UL, DNV GL
Design form compact terminal housing with signal LEDs
Material polycarbonate
Dimensions (W x H x D) 12 mm x 100 mm x 68 mm
Installation on 35 mm DIN rail, conforming to EN 60715 with lock
Side by side mounting by means of double slot and key connection
Marking labeling of the BZxxx series
Wiring solid conductor (e), flexible conductor (f) and ferrule (a): spring actuation by screwdriver
Connection cross-section s*: 0.08…2.5 mm²,
st*: 0.08…2.5 mm²,
f*: 0.14…1.5 mm² s*: 0.08…1.5 mm²,
st*: 0.08…1.5 mm²,
f*: 0.14…1.5 mm²
Stripping length 8…9 mm
Current load power contacts Imax: 10 A

From: 73,00  IVA esc.

Disponibilità:

I più venduti: