EL3048 - BECKHOFF
EL3048 | EtherCAT Terminal, 8-channel analog input, current, 0…20 mA, 12 bit, single-ended
The EL3048 analog input terminal processes signals in the range between 0 and 20 mA. The current is digitized to a resolution of 12 bits and is transmitted (electrically isolated) to the higher-level automation device. The EL3048 EtherCAT Terminal combines eight channels in one housing. The power contacts are connected through. The 0 V power contact is used as reference ground connection for the inputs. The signal state of the EtherCAT Terminal is indicated by light emitting diodes.
Number of inputs 8 (single-ended)
Power supply via the E-bus
Signal type single-ended
Signal current 0…20 mA
Distributed clocks –
Internal resistance typ. 85 Ω
Input filter limit frequency 1 kHz
Dielectric strength max. 30 V
Conversion time 1.25 ms default setting, configurable, multiplex
Resolution 12 bit (16 bit presentation incl. sign)
Measuring error < ±0.3 % (relative to full scale value) Electrical isolation 500 V (E-bus/signal voltage) Current consumption power contacts – Current consumption E-bus typ. 130 mA Bit width in the process image inputs: 32 byte Configuration no address or configuration setting required Special features standard and compact process image, activatable FIR/IIR filters, limit value monitoring Weight approx. 60 g Operating/storage temperature -25…+60 °C/-40…+85 °C Relative humidity 95 %, no condensation Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27 EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4 Protect. rating/installation pos. IP20/variable Pluggable wiring for all ESxxxx terminals Approvals/markings CE, UL, ATEX Ex marking II 3 G Ex nA IIC T4 Gc Design form compact terminal housing with signal LEDs Material polycarbonate Dimensions (W x H x D) 12 mm x 100 mm x 68 mm Installation on 35 mm DIN rail, conforming to EN 60715 with lock Side by side mounting by means of double slot and key connection Marking labeling of the BZxxx series Wiring solid conductor (e), flexible conductor (f) and ferrule (a): spring actuation by screwdriver Connection cross-section s*: 0.08…2.5 mm², st*: 0.08…2.5 mm², f*: 0.14…1.5 mm² s*: 0.08…1.5 mm², st*: 0.08…1.5 mm², f*: 0.14…1.5 mm² Stripping length 8…9 mm Current load power contacts Imax: 10 A
From: 419,00 € IVA esc.