Duenne non è un rivenditore autorizzato

EL3202 - BECKHOFF

EL3202 | EtherCAT Terminal, 2-channel analog input, temperature, RTD (Pt100), 16 bit
The EL3202 analog input terminal facilitates the direct connection of two resistance sensors. The measured resistance value can either be output directly in ohms or transformed into a temperature. If the temperature at the measuring point is of interest, the conversion from resistance to temperature can be carried out in the terminal according to various sensor characteristics (Pt100, Pt1000, NI120, NI1000, KTY types, etc.). The EL3202 can operate sensors in 2- and 3-wire technology, for the 2-wire connection an external bridge is necessary. The EtherCAT Terminals indicate their measurement capability by means of light emitting diodes and status bits in the EtherCAT process image.
Number of inputs 2
Power supply via the E-bus
Technology 2-, 3-wire (default setting: 3-wire)
Distributed clocks –
Input filter limit frequency typ. 1 kHz
Sensor types Pt100, Pt200, Pt500, Pt1000, Ni100, Ni120, Ni1000, resistance measurement (e.g. potentiometer, 10 Ω…1/4 kΩ), KTY sensors (types see documentation)
Connection method 2- or 3-wire (default: 2-wire)
Resolution 0.1 °C per digit
Conversion time approx. 85 ms default setting, 2…800 ms configurable
Temperature range -200…+850 °C (Pt sensors); -60…+250 °C (Ni sensors)
Measuring current < 0.5 mA (load-dependent) Measuring error < ±0.5 °C for Pt sensors Electrical isolation 500 V (E-bus/signal voltage) Current consumption power contacts – Current consumption E-bus typ. 190 mA Bit width in the process image 2 x 32 bit RTD input Special features integrated digital filter, limit value monitoring, variable connection technology Weight approx. 60 g Operating/storage temperature -25…+60 °C/-40…+85 °C Relative humidity 95 %, no condensation EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4 Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27 Protect. rating/installation pos. IP20/variable Pluggable wiring for all ESxxxx terminals Approvals/markings CE, UL, ATEX Ex marking II 3 G Ex nA IIC T4 Gc Design form compact terminal housing with signal LEDs Material polycarbonate Dimensions (W x H x D) 12 mm x 100 mm x 68 mm Installation on 35 mm DIN rail, conforming to EN 60715 with lock Side by side mounting by means of double slot and key connection Marking labeling of the BZxxx series Wiring solid conductor (e), flexible conductor (f) and ferrule (a): spring actuation by screwdriver Connection cross-section s*: 0.08…2.5 mm², st*: 0.08…2.5 mm², f*: 0.14…1.5 mm² s*: 0.08…1.5 mm², st*: 0.08…1.5 mm², f*: 0.14…1.5 mm² Stripping length 8…9 mm Current load power contacts Imax: 10 A

From: 367,00  IVA esc.

Disponibilità:

I più venduti: