Duenne non è un rivenditore autorizzato

EP7211-0034 - BECKHOFF

EP7211-0034 | EtherCAT Box, 1-channel motion interface, servomotor, 48 V DC, 4.5 A, OCT, suitable for STO applications
The EP7211-0034 servomotor EtherCAT Box with integrated One Cable Technology (OCT) offers high servo performance in a very compact design for AM8100 series motors with up to 4.5 A (Irms). The One Cable Technology combines motor cable and absolute feedback system in a single cable. The integrated electronic identification plate of the AM81xx motors can be read in automatically by the servo box to configure the motor parameters. In this way, wiring and commissioning requirements are simplified.
The high-performance control technology supports fast and highly dynamic positioning tasks, while numerous monitoring functions offer maximum operational reliability. EtherCAT as a high-performance system communication enables ideal interfacing with PC-based control technology. LEDs indicate status, warning and error messages as well as possibly active limitations. Two integrated digital inputs enable the connection of limit switches.
The STO function according to EN 61800-5-2 can be implemented with the aid of the non-reactive HWE input according to a safety level Cat. 3, PL d according to DIN EN ISO 13849-1:2015 (see document “EP7211-0034 TwinSAFE application example”).
Technical data EP7211-0034
Protocol EtherCAT
Bus interface 2 x M8 socket, shielded, screw type
Technology compact drive technology
Connection method direct motor connection with OCT
Number of inputs 2 x end position, 1 x feedback, 1 x HWE
Power supply connection feed: 1 x 7/8″ plug, 5-pin; downstream connection: 1 x 7/8″ socket, 5-pin
Load type permanent magnet-excited three-phase synchronous motor
Number of channels 1
Number of outputs 1 x servomotor, 1 x motor brake
Supply voltage power 8…48 V DC (external)
Output current (rms) 4.5 A
Peak current (rms) max. 9.0 A for 1 s
Rotating field frequency 0…599 Hz
PWM clock frequency 16 kHz
Current controller frequency 32 kHz
Rated speed controller frequency 16 kHz
Output voltage motor brake 24 V DC
Output current motor brake max. 0.5 A
Current consumption from US 120 mA
Distributed clocks yes
Realization STO hard-wired via safe output
Special features compact and system-integrated, absolute feedback, One Cable Technology (OCT), plug and play, STO (Safe Torque Off), preset drive profile MDP 742
Safe stop functions Safe Torque Off (STO)
Electrical isolation 500 V
Weight approx. 500 g
Operating/storage temperature -25…+60 °C/-40…+85 °C
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
Protect. rating/installation pos. IP65/66/67 (conforms to EN 60529)/variable
Approvals/markings CE, UL, TÜV SÜD
Dimensions
Housing data 7/8″ infeed
Dimensions (W x H x D) 60 mm x 150 mm x 26.5 mm
Material PA6 (polyamide)
Installation 2 fixing holes 3.5 mm diameter for M3; 2 fixing holes 4.5 mm diameter for M4

From: 725,00  IVA esc.

Disponibilità:

Esaurito

I più venduti: