PZ-G62CP – KEYENCE

Square reflective-regressive, M8 connector type, PNP
PZ-G62CP
Specifications
Model PZ-G62CP
Guy Retro-reflective *1 Detection of transparent objects
Form Rectangular
Emission PNP extension
Cable connection M8 connector *2
Detection distance 0.1 to 1m (when using R-2L reflector)
Spot diameter ―
Light source Infrared LEDs
Sensitivity adjustment One turn trimmer (230°)
Response time 500 µs
Mode of operation LIGHT-ON/DARK-ON (selectable with switch)
Indicators (LEDs) Output: Orange LED, Stable Operation: Green LED
Control output Open collector output, 30 V max., 100 mA max., residual voltage: 1 V max.
Protection circuit Reversed polarity protection against overcurrent, voltage surge absorption
Interference suppression Up to 2 units (with automatic different frequency function)
Tightening torque Rectangular models (mounting hole part): 0.5 N m max.

Classification

Supply voltage From 10 – 30 VDC, including Ripple (PP) 10 %
Current consumption 34mA or less

Environmental resistance

Casing classification IEC: IP67 / NEMA: 4A, 6, 12 / DIN: IP69K
Ambient light Incandescent lamp: 5,000 lux. max., Sunlight: 20,000 lux. max.
Room temperature -20 to +55 °C (No freezing)
Relative humidity 35 to 85% RH (Non-condensing)
Vibration resistance 10 to 55 Hz, 1.5 mm double amplitude, 2 hours each in X, Y, and Z directions
Impact resistance 1,000 m/s 2 , 6 times in each of the X, Y and Z directions
Material
Housing, M18 nut (threaded models only) Glass fiber reinforced PBT
Lens cap Polyarylate (PAR)
Trimmers Glass fiber reinforced polyamide (PA).
Cable (wired models only) Polyvinyl chloride (PVC)
Connector (cable only connector type) ―
Accessories Instruction manual
Weight Models with a rectangular connector: Approx. 10 g