Duenne non è un rivenditore autorizzato

DBS36E-BBEP01024 - SICK

Incremental encoders DBS36 Core
Type: DBS36E-BBEP01024
Part no.: 1066378
Pulses per revolution 1,024
Measuring step 90° electric/pulses per revolution
Measuring step deviation ± 18° / pulses per revolution
Error limits ± 54° / pulses per revolution
Duty cycle ≤ 0.5 ± 5 %
Interfaces
Communication interface Incremental
Communication Interface detail HTL / Push pull
Number of signal channels 6-channel
Initialization time < 3 ms Output frequency ≤ 300 kHz Load current ≤ 30 mA Power consumption ≤ 0.5 W (without load) Electrical data Connection type Cable, 8-wire, with male connector, M12, 8-pin, universal, 0.5 m Supply voltage 7 ... 30 V Reference signal, number 1 Reference signal, position 90°, electric, logically gated with A and B Reverse polarity protection ✔ Short-circuit protection of the outputs ✔ 1) MTTFd: mean time to dangerous failure 600 years (EN ISO 13849-1) 2) 1) The short-circuit rating is only given if Us and GND are connected correctly. 2) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532. Mechanical data Mechanical design Blind hollow shaft Shaft diameter 8 mm 1) Weight + 150 g (with connecting cable) Shaft material Stainless steel Flange material Aluminum Housing material Aluminum Material, cable PVC Start up torque + 0.5 Ncm (+20 °C) Operating torque 0.4 Ncm (+20 °C) Permissible shaft movement, axial static/dynamic ± 0.5 mm / ± 0.2 mm 2) Permissible shaft movement, radial static/dynamic ± 0.3 mm / ± 0.1 mm 2) Operating speed 6,000 min⁻¹ 3) Maximum operating speed ≤ 8,000 min⁻¹ 4) Moment of inertia of the rotor 0.8 gcm² Bearing lifetime 2 x 10^9 revolutions Angular acceleration ≤ 500,000 rad/s² 1) Order collets for 5 mm, 6 mm and 1/4” mm separately as accessories. 2) Higher values are possible using limited bearing life. 3) Allow for self-heating of 4.7 K per 1,000 rpm when designing the operating temperature range. 4) No permanent operatio

From: 452,00  IVA esc.

Disponibilità:

I più venduti: