Duenne non è un rivenditore autorizzato

TRP-C08S - TRYCOM

TRP-C08S
USB 2.0 to 1*RS-232 and 1*RS422/485 Isolated Converter
TRYCOM
Introduction
The TRP-C08S is one standard USB 2.0 to Serials Bridge that has one DB-9 RS232 male connectors and 4 PIN screw terminal for RS422/485. The DB-9 pin serial port is configured as a DTE (data terminal equipment) device which is same as all PC COM ports. The RS422/485 with auto configuration in data format, baud rate and RS485 data flow direction control. RS422/485 equips with 3000VDC of isolation and internal surge-protection on each data line, it gives the host computer and module itself entirely protection from destructive voltage spikes and danger of unregulated voltages input. TRP-C08S also features a high-speed 921.6 K bps transmission rate, and supports various O.S. The industry DIN rail and panel mounting design enable user a fast and professional installation.
Features
USB-2.0 Device Controller
Allow user custom adjust baud-rates.
Each Port can impendent set up the baud-rate and data format.
OS. system get dual port UART serial (1*RS232 and 1*RS422/485).
On-Chip 512-Byte FIFO for upstream and downstream data transfers for serial Port.
Fully PLC support such as Mitsubishi Q,FX and FATEK serial….
Auto direction flow control on RS-485.
Auto baud rate switching from 75bps to 921.6 Kbps.
256 byte buffer for upstream and downstream data flow.
Direct power from USB port , no external power necessary.
3000V DC isolated protection.
Surge protection on RS422/485 data lines.
Power and TXA/RXA/TXB/RXB communication LED indicator .
DIN rail or panel mount support.
Driver Support: Android/Win10/Win8.1/Vista64/32,Windows 98/ME/2000/XP/WIN 7/CE5.0~7.0 , and Linux, and Mac OS .
Specifications
Input: USB 2.0.
Output: RS232 signal: Standard 9 pin DTE full-duplex.
RS422 signal: Differential 4 full-duplex wires (TX+, RX+, TX-, RX-)
RS485 signal: Differential 2 half-duplex wires (D+, D-).
Optical Isolation:RS422/485 3KV.
Data Format: Asynchronous data with any combination of bits, parity, stop
Parity type: None, odd, even mark, space.
Data bit: 5, 6, 7, 8
Stop bits: 1, 1.5, 2.
Flow Control: Xon/Xoff, Hardware, None
Cable: USB 2.0 type A to type B cable.
Communication speed:75~256Kbps.
RS422/485 line protection: Against surge, short circuit,+/- 15KV ESD and voltage peak.
RS232 line protection: +/- 15KV ESD.
Distance: RS422/485 Up to 4000ft (1250M).
Connection type: Screw terminal for maximum AWG #12~30 wire.
Din-Rail mountable: Option.
Power consumption:130mA by USB power.
RS422/485 Optical Isolation: 3000V DC.
Operating environment: -10 to 50℃.
Storage temperature: -20 to 65℃.
Dimension: 151mm X 111mm X 26mm.
Weight: 375g.
Humidity: 10-90% non-condensing.

From: 65,00  IVA esc.

Disponibilità:

I più venduti: